Click on the image to check the artwork
Product Introduction
Â
Extrusion Blow Molding is a unique process that combines blow molding and extrusion. Use an extruder to directly extrude the tube blank and hang it in the pre-separation cavity of the lower mold. Once it reaches the specified length, it is immediately cut off by the die cutout. Compressed air is injected through the small holes on the mold parting surface to form the blank close to the mold wall. The Extrusion Blow Molding process offers a range of advantages that make it ideal for a variety of industrial applications. First, it has a strong industrial design to ensure efficient and reliable production. Second, it utilizes advanced molding technology to achieve high-quality and consistent product manufacturing. Additionally, it is highly customizable and can produce a wide range of products with unique designs and specifications. Key to Extrusion Blow Molding's success is its advanced technology and high-quality manufacturing capabilities. With its experienced team of engineers and state-of-the-art equipment, Kaihua Mold is able to provide customers with unparalleled service. We pride ourselves on our ability to adapt to changing market conditions and provide innovative solutions to meet specific customer needs. Combining strong industrial design, advanced technology and high-quality manufacturing capabilities, we are able to provide customers with efficient and reliable production solutions.
Â
Advantage
1. There are advantages of products, products without seams, high strength at the bottom, accurate mouth size, surface text and pattern clear.
2. With technical advantages, the wall thickness distribution of the billet can be precisely controlled by the injection mold, so that the wall thickness of the obtained container is more uniform, avoiding the thinning phenomenon that is easy to appear in the corner part of general blow molded products.
3. The billet made by injection can be all into the blow mold blowing molding, reducing the waste of molding materials, saving the time of finishing products.
3. Blow molding products generally do not need to be modified after processing, products without seam line, less waste edge waste.
4. In blow molding, the billet is formed by the head under low pressure and blown under low pressure, so the residual stress of the products is small, the tensile resistance, impact, bending and environmental strains and other high performance, with better performance.
5. Blow grade plastics such as PE have much higher relative molecular mass than injection grade plastics. Therefore, blow - molded products have high impact toughness and high resistance to environmental stress cracking.
6. Because the blow mold is only composed of negative mold, the wall thickness of the product can be changed by simply adjusting the gap between the die of the head or the extrusion conditions, which is very advantageous for the products that cannot accurately calculate the required wall thickness in advance.
7. Blow molding can produce very small wall thickness products, and can produce complex shape, irregular and integral products.
8. The type embryo flows out through the extruder head and directly into the blow mold forming, without secondary heating, high production efficiency.
9. In the process of blowing, the embryo is formed through the head, and the lower pressure is blown, which determines that the residual of the blown products is less, the tensile resistance, bending, impact and other strains are higher, and the service life is better.
Â
Detail
Â
 |
 |
 |
|
Â
Innovative Technology
Innovation is Kaihua’s driving force. By learning, absorbing, and transforming new technologies, Kaihua is the leader in light-weight and in maximizing production cycle efficiencies.
|
Type |
Item |
Advantage |
Customer |
|
Leightweight |
Mucell |
Reduce cycle time, Enhance product accuracy, Remove sink marks, Reduce clamping force and reduce product weight |
Mercedes-Benz, Volkswagen, |
|
Gas Assistance |
Reduce production cost, |
Land Rover, |
|
|
Thin Wall |
Reduce production cost i.e.raw material cost /Injection production cost by reducing product weight, |
Geely, Nissan, Toyota |
|
|
Steel to Plastic |
Reduce product weight, |
Land Rover, |
|
|
Efficiency |
Stack Mould |
Reduce mould cost and production cost |
Audi, IKEA |
|
Low Pressure |
Improve the qualified rate as well as cladding sense |
Audi, Volkswagen, |
|
|
In-Mold Degate |
Reduce labor cost,enhance production efficiency |
Ford, Land Rover, |
|
|
Free Spraying |
Reduce production cost, |
Renault, GM |
Â
Unique Management System
From many years of studying and practicing the key fundamental philosophies and methods of Just in Time, Total Quality Management (TQM), Kaizen and other Japanese managerial methodologies, we have developed the Kaihua Management System (KMS) and Kaihua Management Value Engineering (KMVE). Our system ensures the best quality at the lowest cost throughout the production process.
Â
Customers
Main Suppliers
Â
http://www.khmouldmaker.com/